hallo rogier
mooie elise proficiat
welkom op de forum
rudi ruby
Rogier - Striker Sylvia & Striker Racer
- rudi ruby
- Berichten: 542
- Lid geworden op: 24 aug 2010, 21:59
- Naam: Rudi
- Auto: lotus Elise MK1
- Locatie: poperinge
Re: Rogier - Striker Sylvia & Striker Racer
[color=#BF0000]in en uit stappen bij lotus elise
gaat vlotter dan brief posten[/color]
gaat vlotter dan brief posten[/color]
-
- Berichten: 124
- Lid geworden op: 24 dec 2009, 10:39
- Auto: Lotus Exige S2
- Locatie: Nederland
Re: Rogier - Striker Sylvia & Striker Racer
Bedankt allen,
Ben er zelf ook zeer tevreden over. Echt een superwagentje waar je ook prima dagelijks mee kan cruisen.
Ik merkte alleen dat mijn voorste pinker wat los zit. Heb het werkplaatshandboek al gevonden, maar kon zo niet vinden hoe ik het nu weer vast moet zetten. Iemand een idee?
Ben er zelf ook zeer tevreden over. Echt een superwagentje waar je ook prima dagelijks mee kan cruisen.
Ik merkte alleen dat mijn voorste pinker wat los zit. Heb het werkplaatshandboek al gevonden, maar kon zo niet vinden hoe ik het nu weer vast moet zetten. Iemand een idee?
-
- Berichten: 4066
- Lid geworden op: 22 aug 2008, 11:32
- Auto: Europa S +Morgan 4/4
- Locatie: Kortrijk / Altea.
- Contacteer:
Re: Rogier - Striker Sylvia & Striker Racer
The indicator release clip is accessed through a small hole in the clam in the corner of the grill appature, 10 o'clock of the driving lamp if fitted. The hole is visible in the second photo.
A medium sized flat blade screw driver is best used to release the clip.
The clips can break on the S2 indicators making them 'pop' out, and your indicator unit will need replacing, or you can use this handy trick:
Drill a hole in what's left of the bottom indicator tab and then feed a length of nylon shock cord through it.
http://wiki.seloc.org/a/Image:Cord1.jpg
A medium sized flat blade screw driver is best used to release the clip.
The clips can break on the S2 indicators making them 'pop' out, and your indicator unit will need replacing, or you can use this handy trick:
Drill a hole in what's left of the bottom indicator tab and then feed a length of nylon shock cord through it.
http://wiki.seloc.org/a/Image:Cord1.jpg
- Bijlagen
-
- 180px-Cord3.jpg (38.77 KiB) 4306 keer bekeken
-
- Berichten: 124
- Lid geworden op: 24 dec 2009, 10:39
- Auto: Lotus Exige S2
- Locatie: Nederland
Re: Rogier - Striker Sylvia & Striker Racer
Thanks! Ik had de WPH uitgeprint, maar zie nu de digitale versie nog eens en merk dat ik stukken mis. Probleempje met de printer waarschijnlijk....